OASE Jumping Jet Rainbow Star

[view large image]

[view large image]

[view large image]

The new generation of the Rainbow Star combines functionality, virtually unlimited creative freedom, and unique design. The combination possibilities give the system an individual flair. The integrated RGB light can be freely selected and can be supported in its effect by numerous switchable running light functions. Rainbow Star can also cut the water for additional interesting effects.

Key Features

	Can be used indoors and outdoors
	Fully controllable RGB light
	Switchable running light function
	All functions can be controlled by DMX
	Laminar water jet
	Cutoff function

Warranty

1-year manufacturer's limited warranty

IMPORTANT

	When operating the Rainbow Star, water can splash, particularly with water jets that are shot quickly in succession - the amount is approx. 1/2 a gallon per hour - the amount of splash water is negligible if the water jet is operated as a full, continuous parabola
	The water must be clean in order to transport light via the water jet - the target point can only be illuminated by the parabola if the water is clear
	Pump, controller and cables are not included
	Not for use in swimming pools or salt water
	Ships from Oklahoma

[view large image]	[view large image] [view large image]
[view large image]	[view large image]

[view large image]

OASE Easy Control

[view large image]

Laptop not included. PC or laptop is only needed for initial programming. It does NOT have to be permanently connected.
[view large image]

IMPORTANT

	A maximum of 32 devices (receivers) can be connected to one DMX line
	To ensure correct signal transmission, the DMX line should not exceed a length of 330 ft.
	DMX-capable devices are equipped with standardized 5-pole XLR connectors
	Control devices and transmitters have female connectors
	Receiving devices (e.g. dimmer packs, Jumping Jets, etc.) have male connectors
	Not for use in swimming pools or salt water
	Ships from Oklahoma

With the OASE Easy Control you can easily program your system from a PC or laptop - on a well-organized user interface, with freely progammable sequential programs of up to 512 programmable channels, and everything is transmitted simply via USB.

The Device is Quite Simple to Operate
The interface module is connected to a laptop or PC via USB connectors, the software is installed, and you are ready to program. Thanks to the well organized and clearly structured user interface you can create sequential programs without programming skills. The interface module has 256 channels that can be controlled individually. Signals are transmitted via DMX-512

DMX in Detail: Information on the Transmission Protocol
The transmission protocol for our components (e.g. BEST LED, Jumping Jet, etc.) is sent via a serial bus system (in accordance with the industrial protocol RS 485).

The protocol is based on DMX-512 or DMX-512/1990 and originally comes from the application area of stage and show technology. DMX means Digital MultipleXed.

DMX - 512 is an accord concerning the connection between control device (transmitters, such as OASE DMX Easy Control or OASE Musical Fountain Control), and receivers (such as BEST-LED, Jumping Jets, dimmer pack, scanners, etc.).

The data network is structured as a bus topology (daisy chain). The advantage of this structure is that you only need one data line to activate the components (spotlights, Jumping Jet, etc.) because you simply loop the DMX line through from device to device. With DMX-512 up to 512 different information signals can be transferred over one DMX line. A maximum of 32 devices (receivers) can be connected to one DMX line.

Key Features

	Simple programming from PC or laptop
	Clearly organized user interface
	Signal transmission via USB
	Freely programmable sequential programs
	Up to 255 channels can be programmed for standalone operation

Warranty

1-year manufacturer's limited warranty

[view large image]