ShinMaywa
3-Phase Variable Speed
Pump Control Panels
[view large
image]
 |
2-year
manufacturer's limited warranty |
 |
MUST
be wired in by a certified and licenced electrician to a properly grounded
and GFCI (Ground Fault Circuit Interrupter) protected 230 Volt circuit
! |
 |
Not approved
for use in swimming pools or salt water |
 |
Ships from
Oklahoma |
|
|
ShinMaywa 3-phase
variable speed pump control panels offer the ability to use three phase
industrial duty motors in single phase residential applications. These
panels allow the home owner more control over the flow and feel of their
water feature. It is also a well known fact that three phase motors are
far superior to single phase residential motors because they are more efficient
than single phase, they last longer than single phase motors, they have
only one moving part which reduces wear and increases longevity.
 |
No
light dimming in rush current |
 |
Pump "soft
starts" and "soft stops", reducing water hammer and extending the life
of your pump |
 |
Superior
motor overload protection, as well as voltage and power loss protection |
 |
Senses
faults and shorts circuits and shuts down the pump in microseconds to prevent
irreparable motor damage |
 |
Senses
pump clog and will shut the motor down to prevent damage |
 |
Ability
to slow down motor at night realizing substantial power saving while maintaining
critical circulation |
 |
Much larger
motors can be used in residential applications |
 |
Gives owner
the ability to vary the speed of the pump achieving different look and
noise levels in a feature |
 |
Takes the
place of multi-speed motors and/or valves when used for water effect |
 |
Panel measures
10" x 16" x 10" |
 |
Nema
4X weather proof enclosure |
 |
24-hour
timer to control on/off or high/low speed functions |
 |
Dead front
cover to protect from inadvertent shock |
 |
Speed knob
for variable speed control |
 |
Terminals
for incoming power and pump connections |
 |
On/off/auto
switch for manual control or timer operation |
|