Artesian
Series
Oregon
UPS
Ground
-
MUST
be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet !
-
Pumps
supplied without power cord must be hard-wired to a GFCI-protected circuit
by a licenced electrician
-
Not
for use in swimming pools or salt water
-
DO
NOT SUBMERSE !
-
The
data in the charts below was compiled using 2” pipe, 10 ft. in length.
If you use larger pipe, or have longer runs, it can increase the time required
to prime.
-
The
maximum suggested operating height was the greatest height actually tested.
Higher elevations may also work depending on your layout, flow rate and
the unit being used, however you would need to do your own testing.
|
|
PerformancePro
Artesian is the perfect choice for high efficiency and reliability, combined
with the convenience of self-priming. Molded of corrosion-resistant polypropylene,
Artesian pumps are ideal for applications in which the pump is positioned
above the water level. An easy-open Lexan lid provides ready access to
the integral strainer pot's large basket.
Available
in 1/8 to 1/2 HP @ 1,725 low RPM models and 1/2 to 3 HP @ 3,450 high RPM
models.
-
Money-saving
high efficiency pump and motor units
-
Designed
to operate anywhere on their performance curve
-
Long-life
corrosion resistant 316 stainless steel shaft seals
-
Top-of-the-line
US motors
-
All
1,725 RPM motors are totally enclosed for excellent protection and long-term
reliability
-
Both
pump end and motors are designed for quiet operation
-
A 16
AWG, 8 ft. cord with 115 V plug is optional (1,725 RPM models, 1/8 HP to
1/2 HP - please order below)
-
A 12
AWG, 8 ft. cord with 115 V plug is optional (3,450 RPM models, 1/2 HP to
1 HP - please order below)
-
Saltwater
kits are available - please order below
-
1 GPM
minimum recommended continous flow rate
-
3-year
manufacturer's limited warranty
Pump Placement
When determining the placement
of your Artesian pump, two factors will be influenced by its height above
water level. First is its ability to prime. To insure a reasonable prime
time, position the pump no higher than the height shown in the "Maximum
Recommended Suction Lift" column. Second is its ability to operate without
cavitation. To avoid cavitation, position the pump no higher than the height
shown in the "Maximum Suggested Operating Height" column.
Artesian
Pumps Owner's Manual
Artesian
Pumps Manufacturer's Limited Warranty Document
To view these files you need Adobe Acrobat Reader 4.0 or higher. If you
do not already have Adobe Acrobat Reader installed on your computer, please
click on the Adobe logo to download it free of charge.
|
...
...
