Aqua
Lite Fiber Optic Lighting
Oklahoma
UPS
Ground
|
|
Illuminate
your water feature more beautifully than your dreamed possible. Imagine,
fixtures the size of a pen cap, shining brilliant light on your waterfall,
stream beds, plants or wherever you'd like!
How
Fiber Optic Lighting Works
The
AquaLite system consists of a specialized light source (150 or 250 watt
Halogen bulb) located in a box called an illuminator, which is easily hidden
outside the pond. Up to sixteen separate fiber optic cables are bundled
together at one end into an optic port, which is placed in front of the
light source inside the illuminator.
The
light source shines light into the end of the fiber optic cables at the
optic port. Light then travels through the fiber optic cables to wherever
each separate cable ends. Fixtures are attached to the ends of the fiber
optic cables to aim the light at whatever object or area is desired, either
in or out of the water.
A 4
position color wheel allows you to continually rotate colors or stop the
wheel on your favorite color (White, Blue, Magenta & Green). A remote
control unit is also available (sold separately - please see below) to
turn the lighting on & off and control the color wheel.
-
Low
profile fixtures are easy to hide
-
Fixtures
can be placed in or out of the pond
-
Easy
to maintain - only one bulb to replace and it is changed out of the pond
-
Extremely
safe. No electricity, heat, gas or UV in fiber optic tubing
-
Exciting
& dramatic color change options
-
1-year
manufacturer's limited warranty
(warranty
does not cover light bulbs)
AquaLite
Illuminator |
Fiber
Optic Cable Harness with Fixtures Attached |
-
MUST
be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet !
-
Not
for use in swimming pools or salt water
|
...
...
